Frequently Asked
Questions

How do I perform a water test on the gutter guard?

Use a garden hose to check that water is flowing through properly.

Why do I have rainwater runoff?

There are many reasons rainwater runoff may occur. If you are experiencing this, please call our customer experience team (844) 359-7689.

Can these withstand hail?

The All-Aluminum Gutter Guards are made of .019 hardened aluminum. In extreme cases of hail, the gutter guard could sustain some surface dings.

Will these perform in heavy rain?

Punched aluminum gutter guards are best suited for regions that receive moderate amounts of rain. Rainwater diverters can offer an easy solution for heavy flow areas of your roof. For regions with heavy rainfall, consider the Stainless Steel Micro-Mesh version of our gutter guards, which offer maximum protection.

Why do the 6 IN. gutter guards cost more?

6-inch guards require more aluminum material to manufacture than our 5-inch guards, so there is a cost difference between the two sizes.

How do I know what size gutter guards I need?

To get the size of your gutter, measure the top of the gutter, starting at the front top outer lip, straight back to the fascia, just under the roof line.

Most gutters measure 5 IN. or 6 IN. Our All-Aluminum gutter guards are available in both sizes.

Are these available in different colors?

Yes, our All-Aluminum gutter guards are available in both Black, White, or Mill Finish.

Can I paint my gutter guards?

Gutterglove All-Aluminum gutter guards are made available in factory finished paint colors and in a mill finish. Modifications made to any materials or components, including painting, WILL VOID the manufacturer’s warranty and may negatively impact the drainage performance of the gutter guard.

How can I test if my gutter guards are working after installing?

Use a garden hose to check that water is flowing through properly.

Can I flip my gutter guard to use the other color?

No, you cannot flip the gutter guard. We offer the All-Aluminum Gutter Guard in three colors, black, white, and mill finish. Whichever color you purchased is the intended color on the top, and this is the only way it can be installed correctly.

Do I need to secure the back wing of the gutter guard?

We recommend that you secure the back wing as it will add strength to your gutter system and eliminate any movement of the guard.

How do I remove sections of gutter guard?

Simply unfasten the screws (front and back) from any section of the guard that you need to remove.

How do I cut my gutter guards?

We recommend using a new/sharp pair of tin snips. Here is a pair that many of our customers have suggested. Click here to purchase.

How do I prevent snow melt?

Snowmelt can drip off the edge of your gutter and potentially refreeze on the ground, creating a tripping or slipping hazard. When it’s not freezing outside and snow on your roof melting away, snow melt gradually comes down the roof and can slide across the mesh and off your gutter. If that happens and you have concerns about this, you should remove the gutter guard in those areas. This anomaly of snowmelt runoff can happen with all gutter guards.

Do gutter guards cause slipping hazards?

Snow melting and running down your roof can run off the side of the gutter and refreeze on the ground below even when gutter guards are installed. Water frozen on surfaces can create slipping hazards and cause serious bodily harm. CAUTION: ICICLES & ICE DAMS can form on your gutter during freezing conditions. Icicles can break and cause serious bodily harm. Properly installed, operated and maintained heating elements on your roof and gutter can melt icicles and ice dams. Use a licensed electrical contractor in good standing for installing any heating element products.

Will icicles form on my gutter guards?

It’s important to note that icicles can form on ANY gutter guard, including the possibility of ice dams. CAUTION: ICICLES & ICE DAMS can form on your gutter during freezing conditions. Icicles can break and cause serious bodily harm. Properly installed, operated, and maintained heating elements on your roof and gutter can melt icicles and ice dams. Use a licensed electrical contractor in good standing to install any heating element products.

Do my gutter guards require maintenance?

To ensure the optimal performance of your gutter guard, a basic understanding of the product and routine upkeep is recommended. Our gutter guards are designed to be low-maintenance. For maintenance, consider using The 360 Degree Utility Cleaning Brush, explicitly crafted to clean any gutter guard effortlessly. This innovation allows you to stay safely on the ground, eliminating the need for ladders. Attach the brush to any standard extension pole and sweep debris from the ground. To learn more and make a purchase, please click here.

Have Questions?

Reach out to the GutterHawk team today so we can provide you the resources you need to install your gutter guards!